Product Description
Gearbox liquid composite spring is used in high-power four-point support wind turbine gearbox vibration damping system, installed on both sides of the gearbox, mainly to withstand the torsional direction of the gearbox load. Its main features are large torsional stiffness and small vertical stiffness, which can greatly reduce the installation of multi-point support drive system over-constrained load, while with the external load caused by the changes in the rubber cavity to generate pressure differences, so that the liquid in the high-pressure hose connected to the two cavities to achieve the damping characteristics of the flow of the drive system nodding vibration with a significant inhibitory effect. The products are mainly used in 1.5MW~5.0MW wind turbines.
Models
Φ240 gearbox liquid composite spring include TX0100386、TX0100454、TX0100455、TX0100465 etc.
Φ300gearbox liquid composite spring include TX0100245、TX0108004、TX0108012 etc.
Performance Parameters
The gearbox liquid composite spring is designed in accordance with the national standard General Technical Conditions for Rubber Elastic Components for Wind Turbine Generator Systems.
|
Performance |
Typical value |
|
|
Φ240 gearbox liquid composite spring |
Φ300 gearbox liquid composite spring |
|
|
Vertical rigidity |
200 kN/mm |
300kN/mm |
|
Ultimate load |
2000kN |
2800kN |
|
Applicable temperature range |
-30～+50℃ |
|
Application
Φ240 gearbox liquid composite spring is widely used in 1.5MW, 2.0MW, 2.5MW series wind turbine generator systems.
Φ300 gearbox liquid composite spring is widely used in 3.XMW、4.XMW series wind turbine generator systems.
